Product Description
Design feature
The contactor is a direct-acting double-breakpoint structure, and the contact system is divided into upper and lower layers. On the upper layer, there are three pairs of current-limiting contacts and current-limiting resistors to form a surge suppression device. When closing, it is turned on first. After several milliseconds, the working contact is turned on. The permanent magnet in the current-limiting contact is released under the reaction of the spring, which disconnects the current-limiting resistor and makes the capacitor work normally. The internal circuit connection diagram of the contactor (see figure).CJ19-25~43 contactor has two pairs of auxiliary contacts, and CJ19-63~95 contactor has three pairs of auxiliary contacts.Contactor terminals are covered with insulating cover, which is safe and reliable. The terminal of the coil is provided with marked voltage data, which can prevent wrong connection. CJ19-25~43 contactors can be installed with screws, or they can be fastened on the 35mm standard clamp rail by the slider at the bottom. There is a detachable rectangular white card on the mask, which users can use to print the project code, etc. CJ19-63~95 can be installed with 35mm or 75mm standard clip rails.
